WS-I

REL Token Profile Version 1.0

Working Group Draft

2006-01-20

This version:
http://www.ws-i.org/Profiles/RELTokenProfile-1.0-2006-01-20.html
Latest version:
http://www.ws-i.org/Profiles/RELTokenProfile-1.0.html
Editors:
Abbie Barbir, Nortel Networks
Martin Gudgin, Microsoft
Michael McIntosh, IBM
K. Scott Morrison, Layer 7
Administrative contact:
secretary@ws-i.org

Abstract

This document defines the WS-I REL Token Profile 1.0, based on a non-proprietary Web services specification, along with clarifications and amendments to that specification which promote interoperability.

Status of this Document

This document is a Working Group Draft; it has been accepted by the Working Group as reflecting the current state of discussions. It is a work in progress, and should not be considered authoritative or final; other documents may supersede this document.

Notice

The material contained herein is not a license, either expressly or impliedly, to any intellectual property owned or controlled by any of the authors or developers of this material or WS-I. The material contained herein is provided on an "AS IS" basis and to the maximum extent permitted by applicable law, this material is provided AS IS AND WITH ALL FAULTS, and the authors and developers of this material and WS-I hereby disclaim all other warranties and conditions, either express, implied or statutory, including, but not limited to, any (if any) implied warranties, duties or conditions of merchantability, of fitness for a particular purpose, of accuracy or completeness of responses, of results, of workmanlike effort, of lack of viruses, and of lack of negligence. ALSO, THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT WITH REGARD TO THIS MATERIAL.

IN NO EVENT WILL ANY AUTHOR OR DEVELOPER OF THIS MATERIAL OR WS-I BE LIABLE TO ANY OTHER PARTY FOR THE COST OF PROCURING SUBSTITUTE GOODS OR SERVICES, LOST PROFITS, LOSS OF USE, LOSS OF DATA, OR ANY INCIDENTAL, CONSEQUENTIAL, DIRECT, INDIRECT, OR SPECIAL DAMAGES WHETHER UNDER CONTRACT, TORT, WARRANTY, OR OTHERWISE, ARISING IN ANY WAY OUT OF THIS OR ANY OTHER AGREEMENT RELATING TO THIS MATERIAL, WHETHER OR NOT SUCH PARTY HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Feedback

The Web Services-Interoperability Organization (WS-I) would like to receive input, suggestions and other feedback ("Feedback") on this work from a wide variety of industry participants to improve its quality over time.

By sending email, or otherwise communicating with WS-I, you (on behalf of yourself if you are an individual, and your company if you are providing Feedback on behalf of the company) will be deemed to have granted to WS-I, the members of WS-I, and other parties that have access to your Feedback, a non-exclusive, non-transferable, worldwide, perpetual, irrevocable, royalty-free license to use, disclose, copy, license, modify, sublicense or otherwise distribute and exploit in any manner whatsoever the Feedback you provide regarding the work. You acknowledge that you have no expectation of confidentiality with respect to any Feedback you provide. You represent and warrant that you have rights to provide this Feedback, and if you are providing Feedback on behalf of a company, you represent and warrant that you have the rights to provide Feedback on behalf of your company. You also acknowledge that WS-I is not required to review, discuss, use, consider or in any way incorporate your Feedback into future versions of its work. If WS-I does incorporate some or all of your Feedback in a future version of the work, it may, but is not obligated to include your name (or, if you are identified as acting on behalf of your company, the name of your company) on a list of contributors to the work. If the foregoing is not acceptable to you and any company on whose behalf you are acting, please do not provide any Feedback.

Feedback on this document should be directed to wsi_secprofile_comment@lists.ws-i.org.


Table of Contents

1. Introduction
1.1. Relationship to other Profiles
2. Document Conventions
2.1. Security Considerations
2.2. Notational Conventions
2.3. Profile Identification and Versioning
3. Profile Conformance
3.1. Conformance Requirements
3.2. Conformance Targets
3.3. Conformance Scope
3.4. Claiming Conformance
4. REL Token Profile
4.1. References to REL Tokens
4.1.1. References by location
Appendix A: Referenced Specifications
Appendix B: Extensibility Points
Appendix C: Acknowledgements

1. Introduction

This document defines the WS-I REL Token Profile 1.0 (hereafter, "Profile"), consisting of a set of non-proprietary Web services specifications, along with clarifications to and amplifications of those specifications which promote interoperability.

Section 1, "Introduction," introduces the Profile and describes its relationship to other, existing profiles.

Section 2, "Document Conventions," describes notational conventions utilized by this Profile.

Section 3, "Profile Conformance," explains what it means to be conformant to the Profile.

Each subsequent section addresses a component of the Profile, and consists of two parts: an overview detailing the component specifications and their extensibility points, followed by subsections that address individual parts of the component specifications. Note that there is no relationship between the section numbers in this document and those in the referenced specifications.

1.1 Relationship to other Profiles

This Profile adds an additional security token type for use with Basic Security Profile 1.0.

2. Document Conventions

This document follows conventions common to all WS-I profiles. These are described in the following sections.

2.1 Security Considerations

The Profile will draw attention to security considerations; however, these are informational only and should be treated as non-normative. Adherence to these considerations does not guarantee security.

Security considerations are presented as follows:

Cnnnn Statement text here.

where "nnnn" is replaced by a number that is unique among the considerations in the Profile, thereby forming a unique consideration identifier.

2.2 Notational Conventions

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119.

Normative statements of requirements in the Profile (i.e., those impacting conformance, as outlined in "Conformance Requirements") are presented in the following manner:

RnnnnStatement text here.

where "nnnn" is replaced by a number that is unique among the requirements in the Profile , thereby forming a unique requirement identifier.

Requirement identifiers can be considered to be namespace qualified, in such a way as to be compatible with QNames from Namespaces in XML. If there is no explicit namespace prefix on a requirement's identifier (e.g., "R9999" as opposed to "bp10:R9999"), it should be interpreted as being in the namespace identified by the conformance URI of the document section it occurs in. If it is qualified, the prefix should be interpreted according to the namespace mappings in effect, as documented below.

Some requirements clarify the referenced specification(s), but do not place additional constraints upon implementations. For convenience, clarifications are annotated in the following manner: C

Some requirements are derived from ongoing standardization work on the referenced specification(s). For convenience, such forward-derived statements are annotated in the following manner: xxxx, where "xxxx" is an identifier for the specification (e.g., "WSDL20" for WSDL Version 2.0). Note that because such work was not complete when this document was published, the specification that the requirement is derived from may change; this information is included only as a convenience to implementers.

This specification uses a number of namespace prefixes throughout; their associated URIs are listed below. Note that the choice of any namespace prefix is arbitrary and not semantically significant.

2.3 Profile Identification and Versioning

This document is identified by a name (in this case, REL Token Profile) and a version number (here, 1.0). Together, they identify a particular profile instance.

Version numbers are composed of a major and minor portion, in the form "major.minor". They can be used to determine the precedence of a profile instance; a higher version number (considering both the major and minor components) indicates that an instance is more recent, and therefore supersedes earlier instances.

Instances of profiles with the same name (e.g., "Example Profile 1.1" and "Example Profile 5.0") address interoperability problems in the same general scope (although some developments may require the exact scope of a profile to change between instances).

One can also use this information to determine whether two instances of a profile are backwards-compatible; that is, whether one can assume that conformance to an earlier profile instance implies conformance to a later one. Profile instances with the same name and major version number (e.g., "Example Profile 1.0" and "Example Profile 1.1") MAY be considered compatible. Note that this does not imply anything about compatibility in the other direction; that is, one cannot assume that conformance with a later profile instance implies conformance to an earlier one.

3 Profile Conformance

Conformance to the Profile is defined by adherence to the set of requirements defined for a specific target, within the scope of the Profile. This section explains these terms and describes how conformance is defined and used.

3.1 Conformance Requirements

Requirements state the criteria for conformance to the Profile. They typically refer to an existing specification and embody refinements, amplifications, interpretations and clarifications to it in order to improve interoperability. All requirements in the Profile are considered normative, and those in the specifications it references that are in-scope (see "Conformance Scope") should likewise be considered normative. When requirements in the Profile and its referenced specifications contradict each other, the Profile 's requirements take precedence for purposes of Profile conformance.

Requirement levels, using RFC2119 language (e.g., MUST, MAY, SHOULD) indicate the nature of the requirement and its impact on conformance. Each requirement is individually identified (e.g., R9999) for convenience.

For example;

R9999 WIDGETs SHOULD be round in shape.

This requirement is identified by "R9999", applies to the target WIDGET (see below), and places a conditional requirement upon widgets; i.e., although this requirement must be met to maintain conformance in most cases, there are some situations where there may be valid reasons for it not being met (which are explained in the requirement itself, or in its accompanying text).

Each requirement statement contains exactly one requirement level keyword (e.g., "MUST") and one conformance target keyword (e.g., "MESSAGE"). The conformance target keyword appears in bold text (e.g. "MESSAGE"). Other conformance targets appearing in non-bold text are being used strictly for their definition and NOT as a conformance target. Additional text may be included to illuminate a requirement or group of requirements (e.g., rationale and examples); however, prose surrounding requirement statements must not be considered in determining conformance.

Definitions of terms in the Profile are considered authoritative for the purposes of determining conformance.

None of the requirements in the Profile , regardless of their conformance level, should be interpreted as limiting the ability of an otherwise conforming implementation to apply security countermeasures in response to a real or perceived threat (e.g., a denial of service attack).

3.2 Conformance Targets

Conformance targets identify what artifacts (e.g., SOAP message, WSDL description, UDDI registry data) or parties (e.g., SOAP processor, end user) requirements apply to.

This allows for the definition of conformance in different contexts, to assure unambiguous interpretation of the applicability of requirements, and to allow conformance testing of artifacts (e.g., SOAP messages and WSDL descriptions) and the behavior of various parties to a Web service (e.g., clients and service instances).

Requirements' conformance targets are physical artifacts wherever possible, to simplify testing and avoid ambiguity.

The following conformance targets are used in the Profile :

3.3 Conformance Scope

The scope of the Profile delineates the technologies that it addresses; in other words, the Profile only attempts to improve interoperability within its own scope. Generally, the Profile 's scope is bounded by the specifications referenced by it.

The Profile's scope is further refined by extensibility points. Referenced specifications often provide extension mechanisms and unspecified or open-ended configuration parameters; when identified in the Profile as an extensibility point, such a mechanism or parameter is outside the scope of the Profile , and its use or non-use is not relevant to conformance.

Note that the Profile may still place requirements on the use of an extensibility point. Also, specific uses of extensibility points may be further restricted by other profiles, to improve interoperability when used in conjunction with the Profile .

Because the use of extensibility points may impair interoperability, their use should be negotiated or documented in some fashion by the parties to a Web service; for example, this could take the form of an out-of-band agreement.

The Profile's scope is defined by the referenced specifications in Appendix A, as refined by the extensibility points in Appendix B.

3.4 Claiming Conformance

Claims of conformance to the Profile can be made using the following mechanisms, as described in Conformance Claim Attachment Mechanisms, when the applicable Profile requirements associated with the listed targets have been met:

The CCAM URI may change before final publication.

The conformance claim URI for this Profile is "http://ws-i.org/profiles/basic-security/rel-token/1.0" .

4. REL Token Profile

This section of the Profile incorporates the following specifications by reference:

4.1 References to REL Tokens

The following specifications (or sections thereof) are referred to in this section of the Profile :

Web Services Security: Rights Expression Language (REL) Token Profile Section 3.4 defines several mechanisms for referencing REL tokens. This Profile places the following constraints on their use:

4.1.1 References by location

Direct references by shorthand XPointer are easier to resolve than references by licenseId. Using such references is consistent with constraints on other token types.

R6301 Any STR_REFERENCE to a INTERNAL_SECURITY_TOKEN that is an REL_TOKEN containing a wsu:Id attribute, MUST use a Shorthand XPointer Reference.

For example,

CORRECT:

<wsse:Security xmlns:wsse='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd' 
               xmlns:wsu='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' 
               xmlns:xenc='http://www.w3.org/2001/04/xmlenc#' 
               xmlns:ds='http://www.w3.org/2000/09/xmldsig#' >
 <rel:license xmlns:rel='urn:mpeg:mpeg21:2003:01-REL-R-NS'
              wsu:Id='SomeLic' 
              licenseId='uuid:3D680C71-177B-40cc-84C1-123B02503524' >
 . . .
 </rel:license>
 <ds:Signature>
   . . .
   <ds:KeyInfo>
    <wsse:SecurityTokenReference>
     <wsse:Reference
       URI='#SomeLic'
       ValueType="http://docs.oasis-open.org/wss/oasis-wss-rel-token-profile-1.0.pdf#license" />
    </wsse:SecurityTokenReference>
   </ds:KeyInfo>
 </ds:Signature>
</wsse:Security>

INCORRECT:

<!-- This example is incorrect because it refers to REL License using the 
     value of the licenseId attribute rather than the value of the wsu:Id attribute --> 
<wsse:Security xmlns:wsse='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd' 
               xmlns:wsu='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' 
               xmlns:xenc='http://www.w3.org/2001/04/xmlenc#' 
               xmlns:ds='http://www.w3.org/2000/09/xmldsig#' >
 <rel:license xmlns:rel='urn:mpeg:mpeg21:2003:01-REL-R-NS'
              wsu:Id='SomeLic' 
              licenseId='uuid:3D680C71-177B-40cc-84C1-123B02503524' >
 . . .
 </rel:license>
 <ds:Signature>
   . . .
   <ds:KeyInfo>
    <wsse:SecurityTokenReference>
     <wsse:Reference
       URI='uuid:3D680C71-177B-40cc-84C1-123B02503524'
       ValueType="http://docs.oasis-open.org/wss/oasis-wss-rel-token-profile-1.0.pdf#license" />
    </wsse:SecurityTokenReference>
   </ds:KeyInfo>
 </ds:Signature>
</wsse:Security>

This requirement ensures that the integrity and provenance of the license has been determined prior to use.

R6302 Any SECURITY_HEADER child elements MUST be ordered so that any SIGNATURE necessary to verify the issuance of an REL_TOKEN precedes the first SECURITY_TOKEN_REFERENCE that refers to that REL_TOKEN.

Appendix A: Referenced Specifications

The following specifications' requirements are incorporated into the Profile by reference, except where superseded by the Profile:

Appendix B: Extensibility Points

This section identifies extensibility points, as defined in "Scope of the Profile ," for the Profile 's component specifications.

These mechanisms are out of the scope of the Profile ; their use may affect interoperability, and may require private agreement between the parties to a Web service.

Appendix C: Acknowledgements

This document is the work of the WS-I Basic Security Profiles Working Group, whose members have included:

Jan Alexander (Microsoft Corporation), Steve Anderson (BMC), Paula Austel (IBM), Siddharth Bajaj (Verisign), Frank Balluffi (Deutsche Bank), Abbie Barbir (Nortel), David Baum (Kantega AS), Randy Bias (Grand Central Communications), Tim Bond (webMethods, Inc.), Heidi Buelow (Quovadx), David Burdett (Commerce One, Inc.), Ted Burghart (Hitachi, Ltd.) Symon Chang (TIBCO, Inc.), Richard Chennault, (Kaiser Permanente), Dipak Chopra (SAP AG), Jamie Clark (OASIS), Edward Cobb (BEA Systems, Inc.), David Cohen (Merrill Lynch), Brett Cooper, (Accenture), Ugo Corda (SeeBeyond Technology), Paul Cotton (Microsoft Corporation), Suresh Damodaran, (Rosettanet), Mark Davis (Intel), Alex Deacon (Verisign), Thomas DeMartini (ContentGuard, Inc.), Blake Dournaee (Intel), Rob Drew (Charlse Schwab), Gregory Elkins (Reed Elsevier), Mark Ericson (Mindreef), Jon Oyvind Eriksen (Kantega AS), Chris Ferris (IBM), Bob Freund, (Hitachi), Edwin Goei (Sun Microsystems), Grant Goodale (Reactivity, Inc.), Marc Goodner (SAP AG), Phil Goodwin (Sun Microsystems), Marc Graveline (Cognos, Inc.), Eric Gravengaard (Reactivity, Inc.), Thomas Gross (IBM), Martin Gudgin (Microsoft Corporation), Marc Hadley (Sun Microsystems), Mark Hapner (Sun Microsystems), Nathan Harris (Kaiser Permanente), Bret Hartman (IBM), Frederick Hirsch (Nokia), Jason Hogg (Microsoft Corporation), Maryann Hondo (IBM), Lawrence Hsiung (Quovadx), Tony Huber (Commerce Quest), Jim Hughes (Hewlett-Packard), Michael Hui (Computer Associates), Brian Jackson (Avanade, Inc.), Steve Jenisch (SAS Institute), Erik Johnson (Epicor), Chris Kaler (Microsoft Corporation), Anish Karmarkar (Oracle Corporation), Dana Kaufman, (Forum Systems), Manveen Kaur (Sun Microsystems), Slava Kavsan (RSA Security), Paul Knight (Nortel Networks), Chris Kurt (Microsoft Corporation), Kelvin Lawrence (IBM), Hal Lockhart (BEA Systems), Brad Lund (Intel Corporation), Jim Luth (OPC Foundation), Paul Madsen (Entrust, Inc.), Eve Maler (Sun Microsystems), Skip Marler (Parasoft), Axl Mattheus (Sun Microsystems), Michael McIntosh (IBM), Craig Milhiser, (Ascential), Chris Miller (Accenture), Prateek Mishra (Oracle Corporation) Dale Moberg (Cyclone Commerce), Ron Monzillo (Sun Microsystems), K. Scott Morrison, (Layer 7) Tim Moses (Entrust, Inc.), Tony Nadalin (IBM), Nataraj Nagaratnam (IBM), Andrew Nash (RSA Security), Hsin Ning (Bestning Technologies), Eisaku Nishiyama (Hitachi, Ltd.), Mark Nottingham (BEA Systems, Inc.), TJ Pannu (ContentGuard, Inc.), Martine Pean (Quovadx), Robert Philpott (RSA Security), Dave Prout (BT), Joe Pruitt (F5 Networks, Inc.), Eric Rejkovic (Oracle Corporation), Matt Recupito (Accenture), Jason Rouault (Hewlett-Packard), Rich Salz (IBM), Matt Sanchez (Webify Solutions, Inc. ), Jerry Schwarz (Oracle Corporation), Senthil Sengodan (Nokia), Shawn Sharp (Cyclone Commerce), Aslak Siira (F5 Networks, Inc.), David Solo (Citigroup, Inc.), Davanum Srinivas (Computer Associates), Raghavan Srinivas (Sun Microsystems), John Stanton (Defense Information Systems Agency), Andrew Stone (Accenture), Julie Surer (MITRE), Wes Swenson (Forum Systems), Dino Vitale (Citigroup, Inc.), Jonathan Wenocur (IBM), Pete Wenzel (Sun Microsystems), Ian White (Micro Focus)